|
|
|
|
|
|
Valve Covers
 |
VC-455 Stock
Height Valve Covers (with baffles) These stock height, stamped steel (no name), highly polished, triple chrome plated valve covers will fit all Oldsmobile V8 engines 1964 to 1976. 1977 and later 3A, 4A, 5A, 6A and 7A heads have a 5-bolt pattern. One hole for push in breathers. (10 bolt holes, outer height 3.000", inner height 2.750". Baffles will shorten the inside clearance by approximately 1 inch) Set of 2. (Shown here) |
$69.00 |
| VC-458 Stock
Height Valve Covers (without baffles) These stock height, stamped steel (no name), highly polished, triple chrome plated valve covers will fit all Oldsmobile V8 engines 1964 to 1976. This is the same as our VC-455 except it has no inner oil baffle to interfere with SAR-455, 7200 or ARK-455 rocker systems. (10 bolt holes, outer height 3.000", inner height 2.750".) Set of 2. (Not shown) |
$69.00 |
|
 |
VC-460 Tall
Chromed Valve Covers (with baffles) These valve covers have oil baffles and will fit under OEM A/C, power steering, power brake or accessory brackets (some shimming required). Will fit all Pro-Street applications with our 7200 - ARK - SAR rocker kits. (10 bolt holes - Outer height 3.580" - Inner height at baffle 2.660") Set of 2. |
$139.00 |
 |
VC-470 Carbon
Fiber Valve Covers Super strong, super lightweight (a little over 1 lb each) these valve covers make a great addition to your engine. Stock height. No breather holes. (10 bolt holes, outer height 3.000", inner height 2.930") Set of 2. |
$299.00 |
 |
VC-480
Offenhauser Finned Aluminum Valve Covers These cast aluminum valve covers are polished and bear the name 'OFFENHAUSER' along the top. These valve covers come with K&N Breathers. (10 bolt holes, outer height 3.000", inner height 2.700") Set of 2. |
$399.00 |
 |
VC-485
Oldsmobile Aluminum Valve Covers Cast aluminum extra tall valve covers with 'Oldsmobile' in script lettering, and Olds rocket emblems fore & aft. Will fit all roller rocker arm systems and the JM-1160 rocker stud girdle. Will not fit under OEM A/C, power steering, power brake or accessory brackets. (No baffles, outer height 4.750", inner height 4.250", 5 bolt holes but can be drilled for 10, can be ordered with breather holes staggered or straight across. When ordering, indicate your preferences in the 'Comments' area of the order form.) Set of 2. |
$399.00 |
 |
VC-495 Mondello
Aluminum Valve Covers Cast aluminum extra tall valve covers with 'MONDELLO' in block lettering, and Olds rocket emblems fore & aft. Will fit all roller rocker arm systems and the JM-1160 rocker stud girdle. Will not fit under OEM A/C, power steering, power brake or accessory brackets. (No baffles, height 4.000", inner height 3.750", 5 bolt holes but can be drilled for 10, can be ordered with breather holes staggered or straight across. When ordering, indicate your preferences in the 'Comments' area of the order form.) Set of 2. |
$399.00 |
 |
VC-POL Valve
Cover Polishing Have your favorite aluminum valve covers polished to a chrome-like finish. This service can take up to 14 business days to complete, so if you order polished valve covers, please allow extra time to perform this service. Set of 2. |
$150.00 |
Engine Supports
 |
SG-490 Halo
Support Girdle Steel support girdle for Oldsmobile big block or small block engines only. Fits inside oil pan without any special machining. Mounting hardware included. WT-190/195 Windage Tray for use with this girdle (cannot use CT-850 Full Length Windage Tray). Specify block size in "Comments" field on order form. |
$399.00 |
 |
MG-455 Support
Girdle w/Oil Pan For Oldsmobile big block and 350 Diesel engines only. Steel lower end support main cap girdle. Comes with all mounting main studs, hardware & necessary oil pan modifications on your choice of pan. (Please specify choice of pan in the 'Comments' section of the order form when placing your order.) |
$2,650.00 |
 |
MC-2 4
Piece 2 Bolt Main Cap Set These Main Caps are designed to fit Oldsmobile big block engines only. Front cap is included (not shown). Some machining may be required. Bolts and washers included. |
$499.00 |
 |
MC-4 3
Piece 4 Bolt Main Cap Set These Main Caps are designed to fit Oldsmobile big block engines only. These caps will fit inside a stock oil pan. Bolts and washers included. |
$699.00 |
Pulleys & Brackets
 |
2250-5809 Aluminum Pulleys These new 2 groove pulleys are state of the art and fit all 330 through 455 engines. 22% underdrive, deep 'V' groove design. Includes water pump, crankshaft and alternator pulley (with cover plate for alternator pulley). |
$299.00 |
 |
2250-5811 Power
Steering Pump Pulley This is a single groove Aluminum Power Steering Pump Pulley for all Oldsmobile's. Keyway design, not press fit. |
$129.00 |
 |
CWP-300 Water
Pump/Crank Pulley Set This is a 3 groove Aluminum Water Pump Pulley and Crankshaft Pulley for all Oldsmobile's. Allows you to run both air conditioning and power steering. Sold as a set. |
$349.00 |
 |
AB-490 Alternator Bracket Kit This bracket mounts on the lower passenger side. All aluminum. To see how this bracket mounts, check out our Engines page! |
$399.00 |
 |
AB-499 Alternator Bracket Kit This bracket mounts on the lower driver's side. Cannot be used with power steering. To see how this bracket mounts, check out our Engines page! |
$129.00 |
 |
PSB-499 Power
Steering Pump/Bracket/Pulley Package deal! Billet Aluminum Power Steering Pump/Bracket/Pulley. Fits most Oldsmobile engines. Serpentine pulley available soon. |
$499.00 |
Harmonic Balancers
 |
8080 Degreed
Harmonic Balancer/Damper New stock degreed Harmonic Balancer. Degreed 0°-60° and every 90 degrees. Fits all 330-350, Late 400, 403-425-455 V8 Oldsmobile engines. NOTE: 330 Must have TDC remarked, Early 400 & 425 must be rebalanced. |
$149.00 |
 |
8082 OEM Harmonic Balancer/Damper New OEM Harmonic Balancer. Replace your cracked and dried out rubber dampening rings balancer with a new factory unit. Fits all 330-350, Late 400, 403-425-455 V8 Oldsmobile engines. If you want a degreed balancer for precise timing & valve adjustments, use our #8080. NOTE: 330 Must have TDC remarked, Early 400 & 425 must be rebalanced. |
$129.00 |
 |
8084 SFI Certified Harmonic Balancer/Damper New degreed SFI certified Harmonic Balancer. Degreed 0°-60° and every 90 degrees. Fits all 330-350, Late 400, 403-425-455 V8 Oldsmobile engines. NOTE: 330 Must have TDC remarked, Early 400 & 425 must be rebalanced. |
$299.00 |
 |
8086 SFI Certified Harmonic Balancer/Damper New SFI certified Harmonic Balancer. Fits all 330-350, Late-400, 403-425-455 V8 Oldsmobile engines. NOTE: 330 Must have TDC remarked, Early 400 & 425 must be rebalanced. |
$299.00 |
 |
8087 SFI Certified Harmonic Balancer/Damper 'The Rattler 2000' by TCI. New SFI certified Harmonic Balancer. Fits all 330-350, Late-400, 403-425-455 V8 Oldsmobile engines. NOTE: 330 Must have TDC remarked, Early 400 & 425 must be rebalanced. |
$369.00 |
 |
8088 Billet Harmonic Balancer/Damper New SFI certified Harmonic Balancer. Fits all 330-350, Late-400, 403-425-455 V8 Oldsmobile engines. This balancer weighs just 7.8 lbs and is degreed for easy adjustment. NOTE: 330 Must have TDC remarked, Early 400 & 425 must be rebalanced. |
$399.00 |
|
If you would like to contact us or if you have any questions or comments regarding this page, click here. To order a complete 96 page Catalog, click here. For an explanation of our Sales and Return Policies, click here.
|
|
About
Us || Catalogs || Parts
|| Engines || Parts Wanted ||
Aluminum Heads
|
|
|